Standard Accessories
- Laser calibrated axis for high precise positioning Accuracy and Repeatability.
- AC Servo axis Drive.
- Auto & Manual Coolant system.
- Magnetic Shoe Chuck.*
- Dia 80 mm belt driven internal Grinding spindle with 2 sets of quill.
- Coolant tank with Magnetic Coolant Separator.
- Machine with close enclosure.
Optional Accessories
- Servo Controlled C axis (Work Head).
- Heidenhain make Linear Glass Scale (for single or both axis).**
- Dia 100 mm belt driven Internal Grinding spindle in lieu of standard.
- Dia 120 mm belt driven Internal Grinding spindle in lieu of standard.
- Paper band with Magnetic Coolant Separator in lieu of standard.
- Roll Dressing attachment with Spindle (without Diamond Roll).
- Hydraulic diaphragm chucking system (without diaphragm chuck).***
- Fume Extractor (1100m³/hr.)
- Oil Mist Extractor (1500m³/hr.)
- Auto Door.
- Heavy motor for work head (8/11 Nm).
- Wheel head (7.5 hp).
- Axis servo motor (11 Nm).
- 4th axis for Servo controlled Radius Dresser.
- Inline Process Gauge.
- Flagging Probe.
- Auto loading-unloading system (Based on component).
- Servo Voltage Stabilizer.
Controller Specification
- Siemens 808D Advanced Servo Controller.
- Simultaneous 2 axis control.
- Grinding cycles/Dressing cycles.
- Auto refreshing.
- RS 232 C serial Interface port.
- Inch/Metric switchable.
- Pitch error & Back Lash compensation.
- G code / M code compatibility with other NC builders.
- Electronic hand wheel.
OPTIONAL CONTROLLER : Siemens 828D Advanced 2/3 Axis Servo controller with Standard built-in Grinding cycles.
Features
- Box Stand body with heavily ribbed structure for higher rigidity & better damping.
- Coolant outlet near major coolant drop & slope in the bed to flush the Grinding muck.
*Small size Magnetic Shoe Chuck if required.
**For Glass Scale Siemens 828D controller is mandatory.
***As per your Diaphgram chuck & Component.
Specification
| Model | ||
| Description | Unit | IG-30 |
| Capacity | ||
| Centre height | mm | 350 |
| Maximum job clamping (O.D) | mm | 300 |
| Grinding Diameter (min/max) | mm | 16/280 |
| Grinding depth max. | mm | 100 |
| Maximum job weight | kg | 50 |
| Work Head | ||
| Spindle speed range | rpm | 50-500 |
| Spindle nose | MT | 4 |
| Maximum swivel | deg(°) | 15° |
| Spindle motor power | kw/hp | 0.75/1 |
| Cross table (X-axis) | ||
| X-axis stroke | mm | 200 |
| Rapid feed rate | mtr/min | 15 |
| Minimum resolution | mm | 0.001 |
| Feed servomotor torque | Nm | 8 |
| Longitudinal Table (Z-axis) | ||
| Z-axis stroke | mm | 300 |
| Rapid feed rate | mtr/min | 15 |
| Minimum resolution | mm | 0.001 |
| Feed servomotor torque | Nm | 8 |
| Internal Grinding Head | ||
| Spindle size-120mm x 250mm (Max.rpm) | mm | 12000/18000 |
| Spindle motor Power | kw/hp | 3.75/5 |
| Spindle motor speed | rpm | 2800 |
| General | ||
| Total connected load | hp | 15 |
| Supply voltage | volts | 415,3ph,AC 50Hz |
| Machine weight (Approx) | kg | 4500 |